|
|
|
|
|
|
|
|
|
|
|
600X600 led panel light
|
|
| Model No.︰ | LY-66B |
| Brand Name︰ | Enson/ Hilumen |
| Country of Origin︰ | China |
| Minimum Order︰ | 5 pc |
|
|
|
|
|
|
|
|
LED PANEL LIGHT MAIN SPECIFICATIONS( T=20℃)
| ITEM |
DESCRIPTION |
| Input Voltage |
AC90-305V |
| Power Consumption |
50W |
| Luminous Flux |
3800-4200lm(cool white) |
| 3700lm(Natural white) |
| 3500lm(Warm white) |
| Color |
Cool white/Warm white/ Natural white |
| Color Temperature |
2700-3300K(Warm white) 4000-5000K (Natural white) 5500-6500K(Cool white) |
| Life Time |
>50,000 Hour |
| OperatingTemperature |
-10℃ to +40℃ |
| Storage Temperature |
-20℃ to +60℃ |
| Humidity Operating |
10-80% |
| Humidity Storage |
10-80% |
| Luminosity |
A:＞580Lux @1.0M, Cool white) B:1000Lux @1M CW |
| ＞500Lux @1.0M, Warm white) B:890Lux @ 1M WW |
| Certifications |
CE, RoHS |
| Weight |
4.2KGS |
| Size |
595*595*12mm |
| IK Code |
IK04 |
| IP Code |
IP41 |
| Luminaires Class |
Class |
| Fixing Ways |
Recessed,Surface Mounting，Suspended |
|
|
LED PANEL Light Distribution:
Illumination Intensity Chart:
LEDs Lumen Attenuation:
| Operating time(hours) |
Lumen decrease(%) |
| 5,000 |
2.4 |
| 10,000 |
5.2 |
| 20,000 |
11.3 |
| 50,000 |
24.5 |
|
|
|
Dimensions:
|
| |
|
|
Notes:
- All dimension units are millimeters.
- All dimension tolerance is ±0.5mm unless special request.
- Standard size is 595*595mm.
We also supply 593*593mm(Iran)/598*598mm/615*615mm(Germany)
|
|
LED Panel light Packing:
|
 |
Carton Size : 720*720*110mm (5pcs/ctn)
Net weight:25kgs.
Gross weight: 28kgs.
|
|
|
Electrical connection:
| |
 |
|
|
|
Remark:
- 1),This product should be installed by trained electricians.
- 2),Check integrality of the products when unpack the packing.
- 3),The distance between the light and any flammable materials must not be less than 0.2m. The distance between the upper part of the installed light and the ceiling must not be less than 2 cm.The light must not be installed into ceilings or walls that contain heat-insulating material.
- 4),The main cable must not connect with the low voltage cable or the surface-mounted lights.
- 5),Guide the lights' connecting cables through the drilled-out hole,and fix the surface-mounted lights with the pre-fitted clips. Make sure that these are securely connected to the base material.
- 6),When laying the cables, make sure that the cables and plugs are not subjected to any tensileor twisting forces. Fit the cable tension relieving mechanisms to the connection points of thesurface-mounted lights. Do not kink cables. Output cables should be laid separately and at a distance from other cables.
- 7),After installation, connect the transformer to the mains supply.
|
|
|
|
|
|
|
|
Product Image
|
|
|
Related Products
|
|
|
|
|
|
